FAVO Hybrid system

Integrated supply air diffuser
with thermal building mass connection

Thanks to its versatile properties, our patented FAVO Hybrid system, in combination with the A11-S or SPECTRA M-S radiant ceiling sail or the SOFTLINE WOOD high performance module, combines different functions for room climate control. The solution offers very high heating and cooling capacity as well as a silent and draught-free fresh air supply.

FAVO also integrates the building mass into the overall thermal concept. The building mass acts as an additional thermal storage mass and can absorb heat and release it again at a later time. This allows the thermal storage mass of the building to be incorporated specifically into the heating and cooling concept.

Thermal comfort according to EN ISO 7730, SIA 382/1
In combination with A11-S, SPECTRA M-S and SOFTLINE WOOD
Very high heating and cooling capacity
Superior sound absorption values (class A)
Building mass can be used as an additional thermal storage mass
Sound power level Lw < 30 dB(A)
Silent and draught-free fresh air supply
Connection to conventional ventilation ducts

System combinations

+ A11-S Radiant metal ceiling sail
+ SPECTRA M-S Radiant metal ceiling sail
+ SOFTLINE WOOD High performance module

Cooling capacity > 100 W/m² (8 K)
Heating capacity > 100 W/m² (15 K)
Sound absorption Class A
Carbon footprint < 25 kg CO₂/m²

Basis for assessment

Cooling capacity

The cooling capacity corresponds to the amount of energy per second removed from the room via heat radiation and convection. It is determined in accredited climate laboratories in accordance with SN EN 14240.

For comparison: the heat emitted by a person in an office via radiation and convection is approx. 70 – 80 W; the heat emitted by a laptop is approx. 20 – 50 W.

Heating capacity

The heating capacity corresponds to the energy per second added to the room via heat radiation and convection. It is determined in accredited climate laboratories in accordance with SN EN 14037.

For comparison: The heat output of a person in an office via radiation and convection is approx. 70 – 80 W, whilst that of a laptop is approx. 20 – 50 W.

Sound absorption

As the largest unobstructed surface in a room, the ceiling is particularly well suited to sound absorption. The sound absorption class is determined in accordance with EN ISO 11654, based on measurements carried out in accordance with EN ISO 354 in accredited laboratories.

It serves as a parameter for acoustic designers to calculate the effect of a product on a room’s reverberation time.

Carbon footprint

The carbon footprint describes the greenhouse gas emissions associated with a product. These emissions are expressed as CO₂ equivalents. The life cycle stages considered are specified in the respective Environmental Product Declaration and its defined system boundaries.

An Environmental Product Declaration (EPD) transparently presents various environmental impacts of a product based on a life cycle assessment. The calculation is carried out in accordance with the standards and methodological requirements specified in the EPD. Where stated, the EPD is verified by an independent third party.