ALBATROS

High performance module

The ALBATROS high performance module is a climate ceiling system for rooms with high thermal loads and can be used for both cooling and heating. The slotted wing-shaped aluminium fins enable very high thermal capacity.

In combination with an optional sound absorber, the system can also contribute to sound absorption in the room.

ALBATROS offers high area-specific, predominantly convective cooling capacity and can be combined with different air distribution systems. The modular ceiling system can also be used for heating.

Thermal comfort according to EN ISO 7730, SIA 382/1
Building material class A2-s1, d0 according to EN 13501-1
Very high heating and cooling capacity
With optional acoustic inlay: superior sound absorption values (class A)
Combination of high thermal capacity and individual ceiling design
Easy to install
Anodised profiles available
Components can be integrated
Can be combined with ARCHISONIC®

System combinations

+ ARCHISONIC® Acoustic baffle

Cooling capacity > 150 W/m² (8 K)
Heating capacity > 150 W/m² (15 K)
Sound absorption Class A
Carbon footprint < 75 kg CO₂/m²

Basis for assessment

Cooling capacity

The cooling capacity corresponds to the amount of energy per second removed from the room via heat radiation and convection. It is determined in accredited climate laboratories in accordance with SN EN 14240.

For comparison: the heat emitted by a person in an office via radiation and convection is approx. 70 – 80 W; the heat emitted by a laptop is approx. 20 – 50 W.

Heating capacity

The heating capacity corresponds to the energy per second added to the room via heat radiation and convection. It is determined in accredited climate laboratories in accordance with SN EN 14037.

For comparison: The heat output of a person in an office via radiation and convection is approx. 70 – 80 W, whilst that of a laptop is approx. 20 – 50 W.

Sound absorption

As the largest unobstructed surface in a room, the ceiling is particularly well suited to sound absorption. The sound absorption class is determined in accordance with EN ISO 11654, based on measurements carried out in accordance with EN ISO 354 in accredited laboratories.

It serves as a parameter for acoustic designers to calculate the effect of a product on a room’s reverberation time.

Carbon footprint

The carbon footprint describes the greenhouse gas emissions associated with a product. These emissions are expressed as CO₂ equivalents. The life cycle stages considered are specified in the respective Environmental Product Declaration and its defined system boundaries.

An Environmental Product Declaration (EPD) transparently presents various environmental impacts of a product based on a life cycle assessment. The calculation is carried out in accordance with the standards and methodological requirements specified in the EPD. Where stated, the EPD is verified by an independent third party.